VISION MECH
OPENABLE MECHANICAL JOINTS FOR TIMING BELTS
VISION MECH are openable mechanical joints, closed by the insertion of a stainless steel pivot. They can be used for applications with no alternating motion at constant feed rate.
They are applicable only in the presence of acceleration ramps during first start and require roller diameters of not less than 100 mm. They are applicable only if acceleration ramps are present during first start and they require roller diameters of not less than 100 mm. They can be used for conveying products, but only in case of a low working load of 2 N/mm.
Available in standard widths of 50 mm, 75 mm, 100 mm, 150 mm.
Suitable for AT10, T20, AT20 and H.
They are applicable only in the presence of acceleration ramps during first start and require roller diameters of not less than 100 mm. They are applicable only if acceleration ramps are present during first start and they require roller diameters of not less than 100 mm. They can be used for conveying products, but only in case of a low working load of 2 N/mm.
Available in standard widths of 50 mm, 75 mm, 100 mm, 150 mm.
Suitable for AT10, T20, AT20 and H.
